Polycom realpresence group series Reference Guide

System Commands
Polycom, Inc. 324
screen
Returns the name of the current user interface screen on the system, registers or unregisters for screen
changes, or goes to a specific user interface screen.
Syntax
screen
screen register get
screen [register|unregister]
screen “screen_name”
Feedback Examples
● screen
returns
screen: adminsettings
if the Admin Settings screen is currently displayed in the user interface
● screen register
returns
screen registered
● screen monitors
returns
screen: monitors
and displays the Monitors screen in the user interface
Parameter Description
User
Accessible Additional Restrictions
get Returns the registration state for screen
change events when followed by the get
parameter.
screen Returns the name of the current user interface
screen if not followed by other parameters.
register Registers for user interface screen changes. In
register mode, the name of every screen
accessed is listed.
unregister Unregisters from user interface screen
changes.
“screen_name” Changes the user interface to display the
specified screen. The supported screens
depend on the system configuration. To
determine the name to use for a specific
screen, navigate to that screen in the user
interface and send the screen command.

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English