Cables
Polycom, Inc. 78
HDCI Camera Break-Out Analog Cable
This cable breaks out the HDCI camera cable video and control signals to standard interfaces. This cable
can be connected to the EagleEye HD, EagleEye II, EagleEye III, or EagleEye View camera, but does not
support audio. The five BNC connectors can be used to carry YPbPr component video. The DB-9 connector
is used to connect to PTZ camera control interfaces. It is male HDCI to five female BNC and one female
DB-9.
Length Part Number RoHS Compliant
1ft (0.3 m) 2457-23521-001 Yes
Note: Drawings and part numbers are provided for reference only. Polycom claims no responsibility or
liability for the quality, performance, or reliability of cables based on these reference drawings, other
than cables provided by Polycom. Contact your Polycom distributor or Polycom Custom/Vertical
Products to order cables that meet the appropriate manufacturing tolerances, quality, and performance
parameters for your application.
Composite Svideo Component
Red C Pr
Green C Y Y
Blue Pb
Video Output
3 x BNC
Universal Breakout Cable
To Next Page
Loading...
