Polycom realpresence group series

System Commands
Polycom, Inc. 355
systemsetting cameracontent3
Gets the current setting or specifies Camera 4 as a people or content source.
Syntax
systemsetting cameracontent3 <People|Content>
systemsetting get cameracontent3
Feedback Examples
● systemsetting cameracontent3 People
returns
systemsetting cameracontent3 People
● systemsetting cameracontent3 content
returns
systemsetting cameracontent3 Content
● systemsetting get cameracontent3
returns
systemsetting cameracontent3 People
Limitations
Command is not supported on RealPresence Group 300, 310, and 500 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
People Specifies camera as a people source.
Content Specifies camera as a content source.