System Commands
Polycom, Inc. 163
camera
Sets or gets the near-site or far-site camera settings.
Syntax
camera near {1..4}
camera far {1..4}
camera <near|far> move <left|right|up|down|zoom+|zoom-|stop>
camera <near|far> source
camera <near|far> stop
camera near <getposition|setposition “x” “y” “z”>
camera near ppcip
camera near tracking statistics
camera near tracking <get|on|off>
camera for-people {1..4}
camera for-content {1..4}
camera list-content
camerainvert near <get|on|off>
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
on Sets the camera to present an inverted (upside
down) video image.
✓
off Sets the camera to present a normal (right-side
up) video image.
✓
near Specifies that the command selects or controls
the near camera.
✓
far Specifies that the command selects or controls
the far camera.
✓
{1..4} Specifies a near or far camera as the main video
source.
✓
move Changes the near or far camera’s direction or
zoom. Valid directions are: left, right, up, down,
zoom+, zoom-, and stop.
✓
left Starts moving the camera left. ✓
right Starts moving the camera right. ✓
up Starts moving the camera up. ✓
down Starts moving the camera down. ✓
zoom+ Starts zooming in. ✓
To Next Page
Loading...
Need help?
General
