Polycom realpresence group series

System Commands
Polycom, Inc. 331
sleeptime
Gets or sets the wait time value before the system goes to sleep and displays the screen saver.
Syntax
sleeptime <get|0|1|3|15|30|60|120|240|480>
Feedback Examples
● sleeptime 30
returns
sleeptime 30
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
off|1|3|15|30|45|
60|120|240|480
Sets the number of minutes from last
user interaction to entering sleep mode.
The default value is 3. A value of 0
indicates that the system will never go to
sleep.