Polycom realpresence group series

System Commands
Polycom, Inc. 208
encryption
Gets or sets the AES encryption mode for the system.
Syntax
encryption <get|yes|no|requiredvideocallsonly|requiredallcalls>
Feedback Examples
● encryption yes
returns
encryption yes
● encryption no
returns
encryption no
● encryption get
returns
encryption no
● encryption requiredvideocallsonly
returns
encryption requiredvideocallsonly
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
yes Use encryption when the far site is
capable of encryption.
Note: This parameter is called
When Available in the user
interface.
no Disables encryption.
Note: This parameter is called Off
in the user interface.
requiredvideocallsonly Enforces encryption on all video
endpoints. Any video calls to or
from systems that do not have
encryption enabled are not
connected. Audio-only calls are
connected.
requiredallcalls Enforces encryption on all
endpoints. Any video or audio
calls to or from systems that do
not have encryption enabled are
rejected and are not connected.