Polycom realpresence group series

System Commands
Polycom, Inc. 338
snmptrapversion
Gets or sets the SNMP trap version.
Syntax
snmptrapversion get
snmptrapversion set <v1|v2c|v3>
Feedback Examples
● snmptrapversion get
returns
snmptrapversion v2c
● snmptrapversion set v3
returns
snmptrapversion v3
Limitations
None
Comments
After making a change, you must restart the system for the setting to take effect.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
set Sets the SNMP trap protocol that the system
uses.
v1|v2c|v3 SNMP trap version 1, 2c, or 3.