Polycom realpresence group series - Ntpmode

System Commands
Polycom, Inc. 300
ntpmode
Sets the Network Time Protocol (NTP) server mode, which determines how the system connects to the time
server to obtain time settings.
Syntax
ntpmode <get|auto|off|manual>
Feedback Examples
● ntpmode get
returns
ntpmode manual
● ntpmode auto
returns
ntpmode auto
● ntpmode off
returns
ntpmode off
● ntpmode manual
returns
ntpmode manual
Limitations
None
Comments
None
Parameter Description
User
Accessible
Additional Restrictions
get Returns the current time server mode.
auto Sets the connection to the time server as
automatic.
off Turns off the connection to the time server.
manual Sets the connection to the time server as
manual. You can then use the ntpserver
command to manually set the NTP server
address.