System Commands
Polycom, Inc. 299
● notification:mutestatus:near:near:near:near:muted
● notification:screenchange:systemsetup:systemsetup_a
● notification:vidsourcechange:near:1:Main:people
● notification:linestatus:outgoing:32:0:0:disconnected
● notification:vidsourcechange:near:6:ppcip:content
● notification:vidsourcechange:near:none:none:content
● notification: calendarmeetings:
AAAaAEFsZXguTWFjRG9uYWxkQHBvbHljb20uY29tAVEACIjMne2/ndgARgAAAADr9GlhsSjWE
ZBcAAKzMphJBwA4wicbtr3UEZArAKAk09LtAAACZpKWAADe7hJleQIOS7j2mzRJxkLKAAADI/
G8AAAQ:Product Planning:10
Limitations
None
Comments
The notify callstatus command registers the current API session for call status notifications. The API
client receives call status notifications as a call progresses.
Registration for status notifications is session-specific. For example, registering for alerts in a Telnet session
does not return alerts in a simultaneous RS-232 session with the same system.
Duplicate registrations produce another success response. The notify setting remains in effect, even if you
restart the system or update the software with system settings saved.
See Also
See also the nonotify command and the callinfo command.
To Next Page
Loading...
