Polycom realpresence group series

System Commands
Polycom, Inc. 348
subnetmask
Gets or sets the subnet mask of the system.
Syntax
subnetmask get
subnetmask set [“xxx.xxx.xxx.xxx”]
Feedback Examples
● subnetmask set 255.255.255.0
returns
subnetmask 255.255.255.0
● subnetmask get
returns
subnetmask 255.255.255.0
Limitations
None
Comments
After making a change, you must restart the system for the setting to take effect.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current subnet mask.
set Sets the subnet mask of the system when
followed by the ”xxx.xxx.xxx.xxx”
parameter. To erase the current setting, omit
“xxx.xxx.xxx.xxx”. This parameter is not
allowed while in a call.
“xxx.xxx.xxx.x
xx”
Subnet mask of the system.