Polycom realpresence group series

System Commands
Polycom, Inc. 352
systemsetting cameracontent
Gets the current setting or specifies Camera 1 as a People or Content source.
Syntax
systemsetting cameracontent <People|Content>
systemsetting get cameracontent
Feedback Examples
● systemsetting cameracontent People
returns
systemsetting cameracontent People
● systemsetting cameracontent Content
returns
systemsetting cameracontent Content
● systemsetting get cameracontent
returns
systemsetting cameracontent Content
Limitations
Command is not supported on RealPresence Group 300 and 310 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
People Specifies camera as a People source.
Content Specifies camera as a Content source.