System Commands
Polycom, Inc. 180
configpresentation
Gets or sets the content presentation settings for Monitor 1, Monitor 2, or Monitor 3 (when available).
Syntax
configpresentation get
configpresentation <monitor1|monitor2|monitor3> get
configpresentation monitor1 <auto|far|near-or-far|content-or-far|all >
configpresentation monitor2 <near|far|content|near-or-far|
content-or-near|content-or-far|all >
configpresentation monitor3 <rec-all|rec-far-or-near|near|far|content>
Parameter Description
User
Accessible Additional Restrictions
get Returns the current settings for the active
monitors.
✓
monitor1 Specifies settings for Monitor 1. ✓
monitor2 Specifies settings for Monitor 2. ✓
monitor3 Specifies settings for Monitor 3 ✓
auto Sets monitor 1 to show the far site,
content, and then near site as the video
source to display on monitor 1.
✓
far Selects far-site video as the video source
to display on the specified monitor.
✓
near-or-far Sets the monitor to show current people
speaking at the far end.
✓
content-or-far Sets both far-site video and content as
video sources to display on the specified
monitor.
✓
all Selects content, far-site video, and
near-site video as video sources to display
on the specified monitor.
✓
near Selects near-site video as the video source
to display on the specified monitor.
✓
content Selects content as the video source to
display on the specified monitor.
✓
content-or-near Sets both near-site video and content as
video sources to display on the specified
monitor.
✓
far-content-near Sets available far-site content as video
source to display on Monitor 1.
✓
To Next Page
Loading...
Need help?
General
