Polycom realpresence group series

System Commands
Polycom, Inc. 133
apiport
Gets or sets the telnet API port.
Syntax
apiport get
apiport <23|24>
Feedback Examples
● apiport get
returns
apiport 24
● apiport 23
returns
apiport 23
Limitations
None
Comments
After sending the command to change the port, you must exit the current session and reconnect on the new
port.
Parameter Description
User
Accessible Additional Restrictions
get Turns on the test tone.
23 Sets the telnet API port to port 23
24 Sets the telnet API port to port 24. Default
setting.