Polycom realpresence group series

System Commands
Polycom, Inc. 203
enablepvec
Gets or sets the Polycom Video Error Concealment (PVEC) setting on the system.
Syntax
enablepvec <get|yes|no>
Feedback Examples
● enablepvec yes
returns
enablepvec yes
● enablepvec no
returns
enablepvec no
● enablepvec get
returns
enablepvec no
Limitations
None
Comments
This option is enabled by default.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
yes Enables the PVEC option.
no Disables the PVEC option.