Polycom realpresence group series

System Commands
Polycom, Inc. 281
monitor1screensaveroutput
Gets the current setting or sets whether to send either black video or "No Signal" to Monitor 1 when the
screen saver activates.
Syntax
monitor1screensaveroutput <get|black|no_signal>
Feedback Examples
● monitor1screensaveroutput black
returns
monitor1screensaveroutput black
● monitor1screensaveroutput no_signal
returns
monitor1screensaveroutput no_signal
● monitor1screensaveroutput get
returns
monitor1screensaveroutput no_signal
Limitations
None
Comments
Setting Monitor 1 automatically sets Monitor 2 to the same setting.
See Also
See the monitor2screensaveroutput command.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
black Sends black video to Monitor 1 when the
system goes to sleep and the screen saver
activates.
no_signal Sends no signal to Monitor 1 when the system
goes to sleep and the screen saver activates.