Polycom realpresence group series

System Commands
Polycom, Inc. 270
ldapserverport
Gets or sets the port number of an LDAP server.
Syntax
ldapserverport get
ldapserverport set [“port number”]
Feedback Examples
● ldapserverport get
returns
ldapserverport 389
● ldapserverport set 636
returns
ldapserverport 636
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
set Sets the port number of an LDAP server. To
erase the current setting, omit the “port
number” parameter.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system recognizes
the server.
“port number” Specifies the port number of an LDAP server.
The default setting is 389.