Polycom realpresence group series

System Commands
Polycom, Inc. 266
ldapdirectory
Gets or sets the LDAP directory server setting.
Syntax
ldapdirectory <get|yes|no>
Feedback Examples
● ldapdirectory get
returns
ldapdirectory yes
● ldapdirectory no
returns
ldapdirectory no
Limitations
None
Comments
Each Polycom system supports a single global directory server at any given time. Therefore, enabling the
LDAP directory server automatically disables any other global directory server, such as the Polycom GDS
directory server, that is enabled.
If the Polycom GDS directory server and another directory server are defined on the system, the
Polycom GDS directory server becomes the default directory server after upgrading the system software.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
yes Enables the LDAP directory server.
no Disables the LDAP directory server. This is the
default setting.