Polycom realpresence group series

System Commands
Polycom, Inc. 329
sleep
Gets or sets options for sleep mode.
Syntax
sleep
sleep <register|unregister>
sleep mute <get|on|off>
Feedback Examples
● sleep
returns
sleep
This command puts the system into sleep mode.
● sleep register
returns
sleep registered
● If entered again,
sleep register
returns
info: event/notification already active:sleep
● sleep unregister
returns
sleep unregistered
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting for the
sleep
mute
command.
✓
on Mutes the system microphone while the
system is in sleep mode.
✓
off Unmutes the microphone while the system is
in sleep mode.
✓
mute Mutes the system microphone while the
system is in sleep mode.
✓
sleep Places the system in sleep mode, if not
followed by other parameters.
✓
register Registers the system for sleep or wake events. ✓
unregister Unregisters the system for sleep or wake
events.
✓