Polycom realpresence group series

System Commands
Polycom, Inc. 390
systemsetting whitebalancemode1
Gets or sets the user white balance mode for a Polycom camera on Camera port 2.
Syntax
systemsetting whitebalancemode1 <Auto|Manual|3200K|3680K|4160K|4640K|5120K|5600K>
systemsetting get whitebalancemode1
Feedback Examples
● systemsetting whitebalancemode1 Auto
returns
systemsetting whitebalancemode1 Auto
● systemsetting get whitebalancemode1
returns
systemsetting whitebalancemode1 Auto
Limitations
The systemsetting whitebalancemode1 command is not supported on RealPresence Group 300, 310,
and 500 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
<Auto|Manual|3200K|3680K
|4160K|4640K|5120K|5600K
Auto - Automatic white balance
Manual - Manual one touch
white balance
3200K—3200° Kelvin
3680K—3680° Kelvin
4160K—4160° Kelvin
4640K—4640° Kelvin
5120K—5120° Kelvin
5600K—5600° Kelvin