Polycom realpresence group series

System Commands
Polycom, Inc. 138
autoshowcontent
Specifies whether to send content automatically when a computer is connected to the system.
Syntax
autoshowcontent <get|on|off>
Feedback Examples
● autoshowcontent on
returns
autoshowcontent on
● autoshowcontent off
returns
autoshowcontent off
● autoshowcontent get
returns
autoshowcontent off
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
on Sets the system to send content automatically
when a computer is connected to the system.
off Sets the system to not send content
automatically.