Polycom realpresence group series Reference Guide

System Commands
Polycom, Inc. 202
enablemp1080ptx
Gets or sets the option to provide 1080p video on transmit channel for multipoint calls with more than 3
participants.
Syntax
enablemp1080ptx <get|yes|no>
Feedback Examples
● enablemp1080ptx get
returns
enablemp1080ptx no
● enablemp1080ptx yes
returns
enablemp1080ptx yes
● enablemp1080ptx no
returns
enablemp1080ptx no
Limitations
None
Comments
This command is supported when the following conditions are met:
● The Country system location setting for the RealPresence Group system supports the Phase
Alternating Lines (PAL) video encoding system.
● The Advanced Video 1080p and Multipoint Video Conferencing software options are enabled.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
yes Enables 1080p video on transmit channel for
multipoint calls.
✓
no Disables 1080p video on transmit channel for
multipoint calls. This is the default setting.
✓

Polycom realpresence group series Specifications

General

Video Standards	H.264, H.263, H.264 High Profile
Audio Standards	G.711, G.728
Content Sharing	People+Content
Network	H.323, SIP
Security	AES encryption
Video Input	HDMI
Video Output	HDMI
Audio Input	HDMI
Audio Output	HDMI
Audio Features	Noise Reduction, Automatic Gain Control
Connectivity	Ethernet
Ports	Ethernet, HDMI
Compatibility	Microsoft Lync / Skype for Business, BlueJeans, Zoom