System Commands
Polycom, Inc. 293
netstats
Returns network statistics for each call connection.
Syntax
netstats [{0..n}]
Feedback Examples
● netstats 0
returns
call:0 txrate:128 K rxrate:128 K pktloss:0 %pktloss:0.0%
tvp:H.263 rvp:H.263 tvf:CIF rvf:CIF tap:G.722.1 rap:G.722.
1 tcp:H.323 rcp:H.323 tcp:– rcp:-- tcf:-- rcf:H.239
where:
txrate = transmit clock rate
rxrate = receive clock rate
pktloss = number of packet loss/errors
%pktloss = percentage of packet loss/errors
tvp = transmit video protocol
rvp = receive video protocol
tvf = transmit video format
rvf = receive video format
tap = transmit audio protocol
rap = receive audio protocol
tcp = transmit comm protocol
rcp = receive comm protocol
tcp = transmit content protocol
rcp = receive content protocol
tcf = transmit content format
rcf = receive content format
Limitations
None
Comments
Both pktloss and %pktloss report only numbers related to packet loss on the transmit. These numbers
are not affected by packet loss on the Real-time Transport Protocol (RTP) that is received.
Parameter Description
User
Accessible Additional Restrictions
{0..n} Call in a multipoint call, where n is the
maximum number of calls supported by the
system. 0 is the first site connected. If no call is
specified, netstats returns information about
the near site.
✓
To Next Page
Loading...
Need help?
General
