Polycom realpresence group series Reference Guide

System Commands
Polycom, Inc. 238
getconfiguredipaddress
Retrieves the currently configured IPv4 address from the system.
Syntax
getconfiguredipaddress
User Accessible
Yes
Additional Restrictions
None
Feedback Examples
● getconfiguredipaddress
returns
getconfiguredipaddress 1.2.3.4
Limitations
None
Comments
getconfiguredipaddress returns the currently configured IPv4 address of the system regardless of the
status of the LAN connection. This differs from the ipaddress get command, which returns the current
IP address of the system if it has an active LAN connection, else it returns 0.0.0.0.
The definition of “currently configured IPv4 address” depends on the IPv4 address configuration settings:
● If the IP address is set manually the configured IP address is returned, regardless of whether the LAN
connection is currently active.
● If the IP address is obtained automatically, the currently-assigned address is returned, or 0.0.0.0 is
returned if there is no active connection.

Polycom realpresence group series Specifications

General

Video Standards	H.264, H.263, H.264 High Profile
Audio Standards	G.711, G.728
Content Sharing	People+Content
Network	H.323, SIP
Security	AES encryption
Video Input	HDMI
Video Output	HDMI
Audio Input	HDMI
Audio Output	HDMI
Audio Features	Noise Reduction, Automatic Gain Control
Connectivity	Ethernet
Ports	Ethernet, HDMI
Compatibility	Microsoft Lync / Skype for Business, BlueJeans, Zoom