Polycom realpresence group series

System Commands
Polycom, Inc. 161
callstate
Sets or gets the call state notification for call state events.
Syntax
callstate <get|register|unregister>
Feedback Examples
● callstate register
returns
callstate registered
● callstate unregister
returns
callstate unregistered
● callstate get
returns
callstate unregistered
After registering, the following callstate (cs:) data is returned when connecting an IP call:
cs: call[34] chan[0] dialstr[192.168.1.103] state[ALLOCATED]
cs: call[34] chan[0] dialstr[192.168.1.103] state[RINGING]
cs: call[34] chan[0] dialstr[192.168.1.103] state[COMPLETE]
active: call[34] speed [384]
After registering, the following response occurs when disconnecting an IP call:
cleared: call[34]
dialstr[IP:192.168.1.103 NAME:
Polycom Group Series Demo ]
ended: call[34]
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
register Registers the system to give notification of call
activities.
✓
unregister Disables the register mode. ✓