Polycom realpresence group series

System Commands
Polycom, Inc. 249
hangup
Hangs up the current video call.
Syntax
hangup video [“callid”]
hangup all
Feedback Examples
● hangup video
returns
hanging up video
● hangup video 42
returns
hanging up video
and disconnects the specified site, leaving other sites connected
● If callstate register is used for notifications,
hangup video 42
returns
hanging up video
cleared: call[42]
dialstring[IP:192.168.1.101 NAME:RealPresence Group Series Demo]
ended: call[42]
and disconnects the specified site, leaving other sites connected
Limitations
None
Comments
After sending the hangup command, if registered for notification, the feedback response will notify that the
call has ended. The feedback response can take up to 15 seconds.
Parameter Description
User
Accessible Additional Restrictions
video Disconnects the current video call. If the
“callid” parameter is omitted, the system
disconnects all video far sites in the call.
✓
all Disconnects all video and audio sites in the
call.
✓