Polycom realpresence group series

System Commands
Polycom, Inc. 160
callinfo
Returns information about the current call. If you are in a multipoint call, this command returns one line for
each site in the call.
Syntax
callinfo all
callinfo callid “callid”
Feedback Examples
● callinfo all
returns
callinfo begin
callinfo:43:Polycom Group Series Demo:192.168.1.101:384:connected:
notmuted:outgoing:videocall
callinfo:36:192.168.1.102:256:connected:muted:outgoing:videocall
callinfo end
● callinfo callid 36
returns
callinfo:36:192.168.1.102:256:connected:muted:outgoing:videocall
● callinfo all
returns
system is not in a call
when no call is currently connected
Limitations
None
Comments
The callid information is returned using the following format:
callinfo:<callid>:<far site name>:<far site number>:<speed>:
<connection status>:<mute status>:<call direction>:<call type>
Parameter Description
User
Accessible Additional Restrictions
all Returns information about each connection in
the call.
✓
callid Returns information about the connection with
the specified call ID.
✓