Polycom realpresence group series

System Commands
Polycom, Inc. 230
gatekeeperip
Gets or sets the IP address of the gatekeeper.
Syntax
gatekeeperip get
gatekeeperip set [“xxx.xxx.xxx.xxx”]
Feedback Examples
● gatekeeperip set 192.168.1.205
returns
gatekeeperip 192.168.1.205
● gatekeeperip get
returns
gatekeeperip 192.168.1.205
Limitations
None
Comments
The gatekeeperip get command feedback may include the port number after the IP address.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
set Sets the gatekeeper IP address
when followed by the
“xxx.xxx.xxx.xxx” parameter.
To erase the current setting, omit
“xxx.xxx.xxx.xxx”.
“xxx.xxx.xxx.xxx” IP address of the gatekeeper.