Polycom realpresence group series

System Commands
Polycom, Inc. 233
gdsserverip
Gets or sets the GDS server IP address.
Syntax
gdsserverip <get|set> <“ipaddress”>
Feedback Examples
● gdsserverip get
returns
gdsserverip 192.168.1.1
● gdsserverip set 192.168.1.1
returns
gdsserverip 192.168.1.1
Limitations
None
Comments
The gdsserverip command is supported only when H.323 is enabled.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
set Specifies the IP address. ✓
“ipaddress” IP address to use with set
command.
✓