Polycom realpresence group series Reference Guide

System Commands
Polycom, Inc. 282
monitor2screensaveroutput
Gets the current setting or sets whether to send either black video or "No Signal" to Monitor 2 when the
screen saver activates.
Syntax
monitor2screensaveroutput <get|black|no_signal>
Feedback Examples
● monitor2screensaveroutput black
returns
monitor2screensaveroutput black
● monitor2screensaveroutput no_signal
returns
monitor2screensaveroutput no_signal
● monitor2screensaveroutput get
returns
monitor2screensaveroutput no_signal
Limitations
The monitor2screensaveroutput command is not supported on RealPresence Group 300 and 310
systems.
Comments
Setting Monitor 2 automatically sets Monitor 1 to the same setting.
See Also
See the monitor1screensaveroutput command.
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
black Sends black video to Monitor 2 when
the system goes to sleep and the
screen saver activates.
no_signal Sends no signal to Monitor 2 when
the system goes to sleep and the
screen saver activates.

Polycom realpresence group series Specifications

General

Video Standards	H.264, H.263, H.264 High Profile
Audio Standards	G.711, G.728
Content Sharing	People+Content
Network	H.323, SIP
Security	AES encryption
Video Input	HDMI
Video Output	HDMI
Audio Input	HDMI
Audio Output	HDMI
Audio Features	Noise Reduction, Automatic Gain Control
Connectivity	Ethernet
Ports	Ethernet, HDMI
Compatibility	Microsoft Lync / Skype for Business, BlueJeans, Zoom