Polycom realpresence group series

System Commands
Polycom, Inc. 271
ldapsslenabled
Gets or sets the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) encryption state for LDAP
operations.
Syntax
ldapsslenabled get
ldapsslenabled set [on|off]
Feedback Examples
● ldapsslenabled get
returns
ldapsslenabled off
● ldapsslenabled set on
returns
ldapsslenabled on
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
set Sets the SSL encryption state for LDAP
operations.
Note: This parameter does not change the
setting on the server. Instead, this parameter
changes how the Polycom system
recognizes the server.
on Specifies “on” as the encryption state for
LDAP operations. This is the default setting.
off Specifies “off” as the encryption state for
LDAP operations.