Polycom realpresence group series

System Commands
Polycom, Inc. 373
systemsetting remotechannelid
Gets or specifies the IR identification channel to which the system responds.
Syntax
systemsetting remotechannelid {0..15}
systemsetting get remotechannelid
Feedback Examples
● systemsetting remotechannelid 7
returns
systemsetting
remotechannelid 7
● systemsetting get remotechannelid
returns
systemsetting remotechannelid 7
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
0..15 Sets the channel ID to be used with the remote
control.