Polycom realpresence group series

System Commands
Polycom, Inc. 301
ntpsecondaryserver
Sets the NTP server to use for time settings when the primary time server does not respond.
Syntax
ntpsecondaryserver get
ntpsecondaryserver set <“xxx.xxx.xxx.xxx”|server name”>
Feedback Examples
● ntpsecondaryserver get
returns
ntpsecondaryserver 172.26.44.22
● ntpsecondaryserver set
returns
ntpsecondaryserver “”
● ntpsecondaryserver set 172.26.44.22
returns
ntpsecondaryserver 172.26.44.22
Limitations
None
Comments
You must first set the ntpmode command to manual before using the ntpsecondaryserver command.
Parameter Description
User
Accessible
Additional Restrictions
get Returns the current setting.
set Sets the IP address of the NTP server using
the specified IP address or DNS name.