Polycom realpresence group series

System Commands
Polycom, Inc. 290
natconfig
Gets or sets the NAT configuration.
Syntax
natconfig <get|auto|manual|off>
Feedback Examples
● natconfig auto
returns
natconfig auto
● natconfig manual
returns
natconfig manual
● natconfig off
returns
natconfig off
● natconfig get
returns
natconfig off
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
auto Specifies that the system is behind a NAT;
specifies that the system will automatically
discover the public (WAN) address.
manual Specifies that the system is behind a NAT.
Requires the WAN address to be assigned
using the wanipaddress command on
page 408.
off Disables the option when the system is not
behind a NAT.