Polycom realpresence group series

System Commands
Polycom, Inc. 366
systemsetting lineinlevel
Gets the current setting or returns the volume level for audio input 1.
Syntax
systemsetting lineinlevel {0..10}
systemsetting get lineinlevel
Feedback Examples
● systemsetting lineinlevel 5
returns
systemsetting lineinlevel 5
● systemsetting get lineinlevel
returns
systemsetting lineinlevel 5
Limitations
The systemsetting lineinlevel command is not supported on RealPresence Group 300, 310, and 500
systems.
Comments
None
Parameter Description
User
Accessible
Additional
Restrictions
get Returns the current setting. ✓
0..10 Sets the volume level for input 1. Valid range is
0 to 10.