Polycom realpresence group series

System Commands
Polycom, Inc. 353
systemsetting cameracontent1
Gets the current setting or specifies Camera 2 as a People or Content source.
Syntax
systemsetting cameracontent1 <People|Content>
systemsetting get cameracontent1
Feedback Examples
● systemsetting cameracontent1 People
returns
systemsetting cameracontent1 People
● systemsetting cameracontent1 Content
returns
systemsetting cameracontent1 Content
● systemsetting get cameracontent1
returns
systemsetting cameracontent1 Content
Limitations
Command is not supported on RealPresence Group 300 and 310 systems.
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
People Specifies camera as a People source.
Content Specifies camera as a Content source.