Polycom realpresence group series

System Commands
Polycom, Inc. 199
enablefirewalltraversal
Gets or sets the Enable H.460 Firewall Traversal setting. This feature requires an Edgewater session
border controller that supports H.460.
Syntax
enablefirewalltraversal <get|on|off>
Feedback Examples
● enablefirewalltraversal on
returns
enablefirewalltraversal on
● enablefirewalltraversal off
returns
enablefirewalltraversal off
● enablefirewalltraversal get
returns
enablefirewalltraversal off
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting.
on Enables the firewall traversal feature.
off Disables the firewall traversal feature.