System Commands
Polycom, Inc. 285
mpmode
Gets or sets the multipoint conference viewing mode for the system in a multipoint call. The multipoint mode
can be set to auto, discussion, presentation, or fullscreen. By default, it is set to auto.
Syntax
mpmode <get|auto|discussion|presentation|fullscreen>
Feedback Examples
● mpmode auto
returns
mpmode auto
● mpmode discussion
returns
mpmode discussion
● mpmode get
returns
mpmode discussion
Limitations
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
auto In Auto mode, the system switches between
Full Screen Mode and Discussion mode,
depending on the interaction between the
sites. If one site is talking uninterrupted for 15
seconds or more, the speaker appears full
screen.
✓
presentation In Presentation mode, the person who is
speaking appears full screen to the far sites,
while the person who is speaking sees all the
other sites on a split screen.
✓
discussion In Discussion mode (also called Continuous
Presence mode), every site sees all the sites in
the meeting at the same time, on a split
screen.
✓
fullscreen In Full Screen mode, every site in the call sees
the current speaker, or the latest person to
speak, on the full screen.
✓
To Next Page
Loading...
