Polycom realpresence group series

System Commands
Polycom, Inc. 405
volume
Gets or sets the call audio volume (not sound effects) on the system or registration for volume changes.
Syntax
volume <register|unregister>
volume <get|up|down|set {0..50}>
volume range
Feedback Examples
● volume register
returns
volume registered
● If entered again,
volume register
returns
info: event/notification already active:volume
● volume set 23
returns
volume 23
● volume up
returns
volume 24
● volume get
returns
volume 24
Parameter Description
User
Accessible Additional Restrictions
register Registers to receive notification when the
volume changes.
✓
unregister Disables register mode. ✓
get Returns the current volume level. ✓
up Increases the audio volume by 1. ✓
down Decreases the audio volume by 1. ✓
set Sets the volume to a specified level. Requires
a volume setting from {0..50}.
✓
range Returns the valid volume range available to
the user.
✓