Polycom realpresence group series

System Commands
Polycom, Inc. 308
provisionserveraddress
Gets or sets the IP address for the provisioning server.
Syntax
provisionserveraddress <get|set> <”Server Address”>
Feedback Examples
● provisionserveraddress get
returns
provisionserveraddress 10.223.15.152
● provisionserveraddress set 192.168.1.1
returns
provisionserveraddress 192.168.1.1
Limitations
None
Comments
None
Parameter Description
User
Accessible Additional Restrictions
get Returns the current setting. ✓
set Sets the IP address of the provisioning server. ✓
“Server
Address”
Specifies the IP address to use when using the
set command.
✓