System Commands
Polycom, Inc. 164
zoom- Starts zooming out. ✓
stop Stops the movement of the near or far camera.
Returns no feedback.
✓
source Returns the number of the near or far camera
source currently selected.
✓
getposition Gets the pan, tilt, and zoom coordinates of the
currently selected PTZ camera in the format of
pan tilt zoom.
✓
setposition
“x” “y” “z”
Sets the pan (x), tilt (y), and zoom (z)
coordinates of the selected PTZ camera.
Camera PTZ range:
-50000 <= pan <= 50000
-50000 <= tilt <= 50000
-50000 <= zoom <= 50000
Notes:
The camera PTZ range applies to the Polycom
EagleEye HD camera. Different cameras might
have different PTZ values.
Some D30 cameras might not be able to reach
the full range limit. For example, although the
pan limit is 5000, the camera might only be able
to reach a nearby value.
✓
ppcip Specifies People+Content IP as the main video
source if it is running and connected to the
system.
✓
for-people
{1..4}
Sets the source for the specified camera to
People. Camera 3 and Camera 4 are available
on RealPresence Group 700 systems only.
✓
for-content
{1..4}
Sets the source for the specified camera to
Content. Camera 3 and Camera 4 are available
on RealPresence Group 700 systems only.
✓
list-content Gets a list of cameras configured as Content. ✓
Parameter Description
User
Accessible Additional Restrictions
To Next Page
Loading...
Need help?
General
