Polycom realpresence group series

System Commands
Polycom, Inc. 341
range_end For the names and group command, specifies
the end of the range of entries to return. If a
range_start is specified without a
range_end, then the single range_start
entry is returned. If range_end is -1, all
entries starting with range_start are
returned.
✓
group Returns a list of the names of all the sites
included in a local directory group in this
format:
speeddial group {0..n}.
name:"site_sys_name"
sys_label:"site_sys_label"
...
speeddial group "group_name"
[range] done
speeddial group size <num_entries>
Note: For ITP version 2.5 and later a “group” is
a local directory multisite entry.
✓
group_name_mul
tisite_entry_n
ame
A local directory group name. ✓
address Obtains the address information for a specified
entry. If the entry is an ITP system, the results
include the addresses for all codecs. If the
codecs support multiple protocols, the different
addresses are returned on separate lines. This
command is not supported for multisite entries.
✓
sys_name The friendly name for a speed dial entry. It is
the name of the person or the room. It is
surrounded by quotes if it contains spaces.
✓
sys_label If a person/room has more than one system,
the result set includes a row for each system. If
those systems are of the same type, such as
all RealPresence Group Series systems, the
client considers that entry to be a telepresence
system with multiple codecs rather than
separate systems. If the systems are of
different types, such as a RealPresence Group
Series system and a CMA Desktop system,
then this sys_label attribute is included to
differentiate the systems.
✓
type The type of speed dial entry. Possible values
are:
video, multicodec, phone, group.
✓
Parameter Description
User
Accessible Additional Restrictions