System Commands
Polycom, Inc. 127
rvpl = receive video packet loss (H.323 calls only)
rmlpp = receive MLP protocol (H.320 calls only)
tvj = transmit video jitter (H.323 calls only)
tmlpr = transmit MLP rate (H.320 calls only)
rvj = receive video jitter (H.323 calls only)
rmlpr = receive MLP rate (H.320 calls only)
dc = encryption information
rsid = remote system id
ccaps = content capability, where possible responses include “9” (H.239),
“E” (enterprise dual streams), “N” (none), and “P” (content over the people
stream)
tcr = transmit content rate
rcr = receive content rate
tcru = transmit content rate used
rcru = receive content rate used
tcfr = transmit content frame rate
rcfr = receive content frame rate
tcpl = transmit content packet loss
rcpl = receive content packet loss
Limitations
None
Comments
None
See Also
To return network statistics for a call, use the nearloop command.
To Next Page
Loading...
