Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL VF-5C RFL Electronics Inc.
October 8, 2012 41 (973)
334-3100
Table 6. continued - Remote configuration settings (“P” codes)
P Code Digit(s) And Switch Equivalent Value
(1)
Description
P11
B 0 0 0 0 0 0 0 0
↑ - - - - - - -
0 Ch1 Disabled
CH1 DISABLE
1 Ch1 Enabled
B 0 0 0 0 0 0 0 0
- ↑ - - - - - -
0 C
h2 Disabled
CH2 DISABLE
1 Ch2 Enabled
B 0 0 0 0 0 0 0 0
- - ↑ - - - - -
0 Ch1 = FXO
CH1 (FXS
or FXO)
1 Ch1 = FXS
B 0 0 0 0 0 0 0 0
- - - ↑ - - - -
0 Ch2 1kHz Tone Disabled
CH1 1
kHz TONE ENABLE
1 Ch2 1kHz Tone Enabled
B 0 0 0 0 0 0 0 0
- - - - ↑ - - -
0 Ch2 = FXO
CH2 (FXS
or FXO)
1 Ch2 = FXS
B 0 0 0 0 0 0 0 0
- - - - - ↑ - -
0 Ch2 1kHz Tone Di
sabled
CH1 1
kHz TONE ENABLE
1 Ch2 1kHz Tone Enabled
B 0 0 0 0 0 0 0 0
- - - - - - - ↑ -
0 Ch1 2713 Aut
o Turn Off Disabled
CH1 2713 AUTO TURN OFF ENABLE
1 Ch1 2713 Auto Turn Off Enabled
B 0 0 0 0 0 0 0 0
- - - - - - - ↑
0 Ch2 2713 Aut
o Turn Off Disabled
CH2 2713 AUTO TURN OFF ENABLE
1 Ch2 2713 Auto Turn Off Enabled
P12
B 0 0 0 0 0 0 0 0
… For future use.
Do not write to this byte.
P13
B 0 0 0 0 0 0 0 0
… For future use.
Do not write to this byte.
To Next Page
Loading...