RFL Electronics IMUX 2000 - Page 734

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL DS-TT RFL Electronics Inc.
January 31, 2008 32 (973)
334-3100
SET:TIME
To set the time of the TT module do the following: The time is entered as hours, minutes, seconds.
INPUT: 2:C3:SET:TIME=15-34-09;
RESPONSE: * OK
FROM NET ADDRESS = 2;
If an incorrect time is entered:
INPUT: 2:C3:SET:TIME=35-34-09;
RESPONSE: * WHAT
FROM NET ADDRESS = 2
BAD VALUE 35-34-09;
SET:DATE
To set the date of the TT module do the following: The date is entered as month, day, year.
INPUT: 2:C3:SET:DATE=05-28-96;
RESPONSE: * OK
FROM NET ADDRESS = 2;
If an incorrect date is entered:
INPUT: 2:C3:SET:DATE=15-28-96;
RESPONSE: * WHAT
FROM NET ADDRESS = 2
BAD VALUE 15-28-96;