RFL Electronics IMUX 2000 - Page 744

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL Status Module RFL Electronics Inc.
July 15, 2007 2 (973) 334-3100
SPECIFICATIONS
As of the date this Instruction Data Sheet was published, the following specifications apply to all RFL
Status Modules, except as noted. Because all RFL products undergo constant refinement and
improvement, these specifications are subject to change without notice.
Optically Isolated Inputs:
Input impedance: 3000 ohms
Logical “1” input: 3-10ma (10V - 30V)
Logical “0” input: 0 - 0.25ma (0 - 1V)
Relay Outputs:
Max output current: 400ma@150VDC
1A@24VDC
Max open circuit voltage: 150VDC
Installation:
Live insertion/extraction into IMUX 2000 shelf without interruption
of the DS1 or any other DS0.
RFI/EMI: c.37.90.2, IEC-801-x
MTBF (calculated): bellcore tr-332 > 500,000 hours at 25
o
C.
Power Consumption: 2 watts maximum
Operating temperature: -20
o
C to + 55
o
C (-4
o
F to +131
o
F)
Humidity: 0 to 95 percent, non-condensing
Dimensions:
Length: 9.8 in (24.8 cm)
Width: 0.6 in (1.5 cm)
Height: 4.5 in (11.4 cm)
Weight:
Net: 10 oz (0.28 kg)
Shipping: 1 lb (0.45 kg)