Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
To view a list of the APRIL commands, press the [H] and [ENTER] keys:
MA-490 >H [ENTER]
This tells the MA-490 to send a list of APRIL commands called the "main menu" to your terminal.
The main menu appears in Figure 9.
RFL Electronics APRIL(t) Remote Communications, Version 2.1 (c)1993,1999
H - Display the main menu
P - Go to the programming menu (password required)
D - Go to the read settings menu
F - Go to the software version display
Craft port will enter console mode after 10 seconds of inactivity,
If enabled. Hit “Escape” key 3 times to return to APRIL.
MA-490>
Figure 12. APRIL main menu
For more information on each APRIL command, refer to the paragraph numbers listed below.
Command Meaning Page
H Display the main menu 14
P Go to the programming menu (password) 16
D Go to the read settings menu 18
F Go to the software version display 19
DISPLAYING APRIL HELP
To see a list of APRIL commands while the "MA-490>" prompt is displayed, use the "H" command.
MA-490>H [ENTER]
When you invoke the "H" command, the APRIL command main menu shown in Figure 9 will re-
appear on your screen.
RFL MA-490 Telnet I/O RFL Electronics Inc.
March 6, 2007 17 (973)
334-3100
To Next Page
Loading...