RFL Electronics IMUX 2000 - Page 891

Because RFL™ and Hubbell® have a policy of continuous product improvement, we reserve the right to change designs and specifications without notice.
RFL NCM RFL Electronics Inc.
November 1, 2012 45 (973)
334-3100
“S” CODES
“S” codes appear in response to a “STATUS?” query. There are eleven “S” codes for the NCM
module: S01 through S11. Like the “P” code, this number is displayed in both decimal and binary
form. The four least significant digits of the binary number represent the conditions shown in Table 7.
The four most significant digits are not used.
A typical response to a “STATUS?” query looks like this:
* OK
CHANNEL CARD 3, TYPE 117
S01 = 3 (B00000011)
S02 = 3 (B00000011)
S03 = 3 (B00000011)
S04 = 3 (B00000011)
S05 = 3 (B00000011)
S06 = 3 (B00000011)
S07 = 3 (B00000011)
S08 = 3 (B00000011)
S09 = 3 (B00000011)
S10 = 3 (B00000011)
S11 = 3 (B00000011);