SERVICE PROGRAM MODE
SM 5-43 B121 Series/B259 Series
Service
Tables
5508* CC Call
Jam Remains 0: Disable, 1: Enable 5508 1*
Enables/disables initiating a call for an unattended paper jam.
Frequent Jams 0: Disable, 1: Enable 5508 2*
Enables/disables initiating a call for consecutive paper jams.
Continuous Door Open 0: Disable, 1: Enable 5508 3*
Enables/disables initiating a call when the front door remains open.
Low Call Mode 0: Normal mode, 1: Reduced mode 5508 4*
Enables/disables the new call specifications designed to reduce the number of calls.
Jam Detection: Time Length [03~30 / 10 / 1] 5508 11*
Sets the time a jam must remain before it becomes an ”unattended paper jam”. This
setting is enabled only when SP5508 004 is set to 1.
Jam Detection: Continuous
Count
[02~10 / 5 / 1] 5508 12*
Sets the number of consecutive paper jams required to initiate a call. This setting is
enabled only when SP5508 004 is set to 1.
Door Open: Time Length [03~30 / 10 / 1] 5508 13*
Sets the length of time the door remains open before the machine initiates a call.
This setting is enabled only when SP5508 004 is set to 1.
CC Call: Long Time Jam [0 = Auto call / 1 = Alarm] 5508 21
Selects the machine reaction to long time jams.
CC Call: Continuous Jam [0 = Auto call / 1 = Alarm] 5508 22
Selects the machine reaction to continuous jams.
CC Call: Door Open [0 = Auto call / 1 = Alarm] 5508 23
Selects the machine reaction to door open.
5801
Memory Clear
All Clear 5801 1
Executes the following memory clears at the same time: SP5-801-2 through 12.
SCS 5801 3
Initializes the system-control-service settings.
IMH Memory Clear 5801 4
Initializes the image-memory-handler settings.
MCS 5801 5
Initializes the memory-control-service settings.
Copier application 5801 6
Initializes the copier-application settings.
Fax application 5801 7
Initializes the fax-application settings.
Printer application 5801 8
Initializes the printer-application settings.
Scanner application 5801 9
Initializes the scanner-application settings.
Web service/Network application 5801 10
Deletes the network file application management files and thumbnails, and
initializes the job login ID.