SERVICE PROGRAM MODE
SM 5-45 B121 Series/B259 Series
Service
Tables
5816*
Remote Service
I/F Setting [0=Remote diagnostics off/1=Serial (CSS or NRS)
remote diagnostics on/2=Network remote diagnostics]
5816 1
Enables or disables the remote diagnostics function.
CE Call 5816 2
Allows the customer representative to start or end the remote machine check using
CSS or NRS by pressing the center report key.
Function Flag [0 = Disabled / 1 = Enabled] 5816 3
Enables or disables remote diagnosis via the NRS network.
Device Information Call Display [0 = Disabled / 1 = Enabled] 5816 6
Determines whether the device information call (NRS) is displayed.
SSL Disable [0 = Disabled / 1 = Enabled] 5816 7
Determines whether the SSL sends the remote-communication-gate confirmation.
RCG Connect Timeout
[1∼ 90 / 10 / 1 second/step]
5816 8
Sets the timer for the remote-communication-gate connection (NRS).
RCG Write to Timeout
[0∼ 100 / 60 / 1 second/step]
5816 9
Sets the timer for writing data to the remote communication gate (NRS).
RCG Read Timeout
[0∼ 100 / 60 / 1 second/step]
5816 10
Sets the timer for reading data from the remote communication gate (NRS).
Port 80 Enable 5816 11
Determines whether permission is granted for access to the SOP via Port 80
(NRS).
5821* Remote Service Address Japan Only.
5821 1* CSS PI Device Code Sets the PI device code. After changing this setting,
you must switch the machine off and on.
5821 2* RCG IP Address Sets the IP address of the RCG (Remote
Communication Gate) destination for call processing at
the remote service center.
[00000000h ~ FFFFFFFFh/ 00000000h /
5824
NVRAM Upload
5824 1 5.1.11
5825
NVRAM Download
1 5.1.11
5828* Network Setting
Delete Password 5828 74*
Deletes the NCS (Network Control Service) password. Sets the Telnet, WSM (Web
Status Monitor), and remote ROM update passwords to NULL (empty)
Print Settings List 5828 84*
Prints a list of the NCS parameter settings.
TELNET (0:OFF 1:ON) [0 = Disabled / 1 = Enabled] 5828 90*
Disables or enables Telnet operation. If this SP is disabled the Telnet port is closed.
Web (0:OFF 1:ON) [0 = Disabled / 1 = Enabled] 5828 91*
Disables or enables the Web operation.
To Next Page
Loading...
