BIT SWITCHES
B620 26 B620
System Switch 10
No FUNCTION COMMENTS
0
to
7
Threshold memory level for
parallel memory transmission
Threshold = is N x 128 kbytes + 256 kbytes
N can be between 00 - FF(H)
Default setting: 02(H) = 512 kbytes
System Switch 11 SP No. 1-101-018
No FUNCTION COMMENTS
0
TTI printing position
0: Superimposed on the page
data
1: Printed before the data
leading edge
Change this bit to 1 if the TTI overprints information
that the customer considers to be important (G3
transmissions).
1-7 Not used Do not change the factory settings.
System Switch 12 SP No. 1-101-019
No FUNCTION COMMENTS
0
to
7
TTI printing position in the main
scan direction
TTI: 08 to 92 (BCD) mm
Input even numbers only.
This setting determines the print start position for
the TTI and CIL from the left edge of the paper. If
the TTI is moved too far to the right, it may overwrite
the file number which is on the top right of the page.
System Switch 13 - Not used (Do not change the settings.)
System Switch 14 - Not used (Do not change the settings.)
To Next Page
Loading...
